[Kenwood] Battery replacement

[ad6zu at comcast.net]

It does nothing other than clearing  the memory settings (like a "reset all")

Things you may want to do:
- Solder in a battery clip
- Better yet, run leads to a battery holder that is easier to get to than the present location
- Using a "jumbo" battery like a DL123 doesn't really help because the leakage rate (shelf life) will be about the same as the discharge rate (rated at about 10 years)
- Write the date that you changed the battery on the back of the radio or on the inside of the top cover.

----- Original Message -----
From: Tom Osborne 
To: Kenwood 
Sent: Mon, 21 Sep 2009 00:13:58 +0000 (UTC)
Subject: [Kenwood] Battery replacement

HI All

I'm need to unsolder the battery to check the trace to the antenna tuner 
under it in my TS-450SAT.  Does it screw up anything other than resetting 
memories, etc, when taking the battery out?  Thanks and 73
Tom W7WHY

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html