[Kenwood] Interface connectio

[Peter Ravn]

My Kenwood TS850 now works fine with the following settings: COM 7, baude 
rate 4800, data bits 8, stop bits 1, parity none, RTS on, DTR on. I copied 
the settings from the Ham de Luxe log programme, which automatically finds 
the right speed and port.

Thanks for the answers.

73 de Peter
OZ8CTH

----- Original Message ----- 
From: "Michael Brown" <k9mi at comcast.net>
To: "Peter Ravn" <fasan5 at privat.dk>; <Kenwood at mailman.qth.net>
Sent: Sunday, October 25, 2009 4:06 PM
Subject: Re: [Kenwood] Interface connectio


> Hi Peter
>
> I am unfamiliar with your software, but sometimes demo software does not 
> give you all the functions, although sometimes it does. I have used rig 
> control for the last 12 years with 850's I've owned using different 
> contest logging software and general logging software. The parameters that 
> have worked are:
>
> Comport: x (whatever comport you are using. I would try RS 232 over usb if 
> that's possible)
> Baud Rate: 4800
> Data Bits:   8
> Stop Bits   2
> Parity:       None
>
> You may need to check your bios and see if the comports are turned on. 
> Here are some of the programs that are free now that I have had working 
> over the years. My interface BTW, is a 3rd party one from W1GEE that has 
> always worked well. At $40, it was much more affordable then the Kenwood 
> IF-232.
>
> CT or CTwin now that I am using Windows XP. Log-EQF demo, TRlog (not 
> free), WriteLog (not free), N1MM Contest logger (free) and TR4W beta 
> (Windows contest logger similar to TRlog).
>
> GL Peter and keep us posted.
>
> 73, Mike K9MI
>
>
>
>
>
> ----- Original Message ----- 
> From: "Peter Ravn" <fasan5 at privat.dk>
> To: <Kenwood at mailman.qth.net>
> Sent: Sunday, October 25, 2009 10:50
> Subject: [Kenwood] Interface connectio
>
>
>> The Kenwood CAT interface from ZLP Electronics in the UK is said to do 
>> verything the original Kenwood IF-232 does, but it does not connect my 
>> TS850 and TS950SDX to any of my two personal computers, neither on the 
>> USB nor on the RS232 comport. I am using the nGenLog DEMO log programme 
>> and have carefully followed the instructions. So what do I do wrong?
>>
>> 73 de Peter
>> OZ8CTH
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Kenwood at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>