[Kenwood] New to Kenwood

[Fern]

Erik:
     The burnt resistors are likely the resistors used in the cathode of both final tubes so  you should not need to replace that whole pc board or is the board itself burnt up?  Fern


----- Original Message ----- 
From: "Erik Iddings" <erikwiddings at embarqmail.com>
To: "Kenwood List" <kenwood at mailman.qth.net>
Sent: Thursday, May 14, 2009 3:38 PM
Subject: [Kenwood] New to Kenwood


> Hello all,
> I have just obtained a TS520 rig that needs repair.  I was told that it 
> wouldn't transmit so I dug into it when I got it home. I immediately 
> discovered the Final Unit (X56-1220-00) PC board under the finals has 3 
> burnt resistors on it and that the 6146B tubes were bad on the tube 
> tester.  Where can I find a replacement PC board?
> 
> Thanks and 73's
> 
> Erik
> KF4KRK
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.329 / Virus Database: 270.12.29/2114 - Release Date: 05/14/09 06:28:00