[Kenwood] T-599D R-599D Interconnect Cable Issue

[manualman]

I just pulled the schematics for both the receiver and transmitter. The
pin 7 to 16 jumper connection will give you the cold side return for the
receiver relay. Let's all make a drawing for the cable and put it with
the transmitter docs. I guess Kenwood tried to save some ink by not
including that info.
 
Pete, wa2cwa
 
On Fri, 19 Jun 2009 14:39:52 -0400 Bill Cromwell <wrcromwell at gmail.com>
writes:
> Hi John,
> 
> I have plain vanilla 599 twins. I snagged the cable and checked it 
> with
> my ohm meter for continuity. I have a small text file that I am 
> going to
> email you off-list. If you wired single pins to single, same 
> numbered
> pins you will also need to connect pins 7 and 16 together. I would 
> think
> a short jumper inside one shell from 7 to 16 would do the trick. A
> number of pins are not used in my cable. Those must be like the 
> crossed
> wire in the RS-232 null modem data/control cables.
> 
> 73,
> 
> Bill  KU8H