[Kenwood] stiff drive control

[b1blancer1 at earthlink.net]

I remember the drive control on the.520S I used to have was rather stiff, although never having been to the South Pole, I have no personal knowledge of the stiffness of snakes there.

----------
Sent from my Verizon Wireless LGVX10000 .

------Original Message------
From: Neil  <neil at ghostdog.com>
To: <kenwood at mailman.qth.net>,"Neil" <neil at ghostdog.com>
Date: Fri, Jun 19, 9:41 AM -0700
Subject: [Kenwood] stiff drive control

Hey Kenwood'ers,

The 'Drive' control on my 520 is stiff as a snake at the
South Pole. 

I've had the top cover off, doused the drive chains and
variable cap sections, and bearing, with a reasonably good
electronic parts lube and cleaner, to no avail. Really hard
to adjust. I'm thinking of putting a larger diameter knob on
the shaft, even though that will completely blow this
beauty's fine looks.

I haven't been into the 6146's living room yet. Is there
anything in there that might need attention? I suppose the
plate tuning cap is hiding within...

Is this a common problem with this model?

Much thanks, Neil KH6EAM
 

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html