[Kenwood] TS-480

[J. Moen]

QSK works well on the 480, but I can't speak to the waveform.

On a TS-2000 list, the subject of the 480 came up.  Simon Brown, author of 
the excellent Ham software suite Ham Radio Deluxe
(www.ham-radio-deluxe.com), really likes the 480:

"I prefer listening to 20m CW with the TS-480SAT.... Even when I owned the 
IC-7800 I prefered a good analogue radio for CW and
the TS-480SAT has to be the most under-rated radio available today."

He also wrote:
"IMO the TS-480SAT is the finest HF radio for digital modes and the best 
value for money of all HF radios."

He recommends people take a look at the excellent design documentation 
written by the 480 engineers.  It can be found at:
http://www.kenwood.com/i/products/info/amateur/ts_480/pdf/TS-480_manual_E.pdf

   Jim - K6JM

----- Original Message ----- 
From: "Ken Brown" <ken.d.brown at hawaiiantel.net>
To: <kenwood at mailman.qth.net>
Sent: Monday, August 10, 2009 9:56 PM
Subject: [Kenwood] TS-480


 Hi all, I am new to this list. I would like to get some impressions from
you about the Kenwood TS-480. I am considering purchasing one someday. I
am primarily a CW operator. I would like to know how good is the TS-480
QSK? How is the receiver for picking weak ones out? I would no doubt get
one of the narrow optional CW filters for it.

I am also curious about the CW envelope shape, when operating at reduced
power. I have a TS-440 which I used to drive a SGC SG-500 amplifier. The
SG-500 only wanted about 50 to 60 watts of drive. When I turned down the
TX power on the TS-440 the keying envelope got funny. It had a sort of
slow to rise, soft leading leading edge which made my CW hard to copy,
and I got plenty of unsolicited reports about it. When I looked at it
with a scope it was obvious what people said they were hearing. I found
that I could make adjustments to the ALC to restore the envelope to
normal, but then not be able to turn the power up above 60 watts.
Eventually I built a power attenuator of about 2 to 2.5 dB to reduce the
full 100 watts down to what the SG-500 liked. Then if I did not have the
amplifier hooked up I still had a full 100 watts available from the TS-440.

 Have any of you had experience running either the 100 watt or the 200
watt version of the TS-480 at reduced power out on CW? Does the CW
envelope change at all when running at reduced power?

 Thanks,

 Ken N6KB