[Kenwood] Many Kenwood items FS - HT, mics, and much misc.

[Ken Simpson, W8EK]

Kenwood items for sale:

Kenwood TH-41 AT HT for 440 MHz.
This compact HT has thumbwheel switches to select the operating 
frequency. The HT has about 1.5 watts output, and a decent receiver. 
It has a touchtone pad on it, and is very simple to operate. You likely
will not need to read to manual to use this one!
It includes a good battery (new insert a couple months ago), charger, 
rubber duck, carrying strap, and paper work for $60.

Kenwood MC-45 DM, DTMF mic plus other functions
In addition to the touch tone pad and PTT switch, this mic 
has up-down switches, plus a row of four switches above 
the touch tone pad.  They are used for "Call Button", VFO 
key, Memory recall key, and the fourth one is programmable. 
The back has a lock switch. It has an RJ-45 connector (like 
a computer LAN).
This particular mic works fine, and looks fine also.  It is still 
in its original box, with paper work for only $60.

Kenwood MC-48, touch tone (DTMF) microphone.
Round, 8 pin connector, will go with any Kenwood rig 
taking this kind of connector. Has UP and DOWN 
switches, along with 16 digit touchtone pad. It is often used 
on the 2 m and 440 MHz rigs that do not have touchtone 
built in, but can also be used on HF rigs for touchtone on 
10 m FM. It works fine and looks great also. 
With paper work for $ 55.

Kenwood MJ-68 microphone connector adapter
Converts a round 6 pin Kenwood mic connector, so it can 
be plugged into a Kenwood rig with the round 8 pin 
connector. Like new. $20


Belt clip for TR-2400 HT, complete with hardware - $8

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks fine 
and works fine. $18

Battery charge cable for Kenwood TR-2400 HT
This is an adapter that permits one to charge the battery of the 
Kenwood TR-2400, 2 meter HT, outside of the HT itself. Usually, 
one must have the battery inside the HT, but this lets you charge 
a second battery outside of the HT. The original charger is used. 
It is in good shape, and works fine. $3

Wrist strap - I think it fits most Kenwood (and maybe other) HTs - $4

Antenna adapter to fit the BNC connector on the HT and provide 
an SO-239 connector that will permit a PL-259 to be attached. $5

Antenna adapter for Kenwood TH-21 / 31 / 41 HTs
This adapts the antenna connector found on these HTs to a 
standard BNC connector. $5

Special rubber duck antenna for Kenwood TH-21 HT with 
threaded connector
Aftermarket stubby, 3.5 inches long - $10
Kenwood RA-6 regular, 6.6 inches long - $12


Kenwood PC-1 phone patch For Sale
This is the model with the 4 pin connectors, although
they can be changed, if needed. It includes a nice meter
for adjusting the null so VOX will work OK. 
This particular unit works fine, and looks very, very good. 
No scratches. With paperwork for $ 40 


Original Kenwood Manuals For Sale:

All manuals are in very nice, close to new
condition, for Kenwood radios, unless stated otherwise.

Operating manual for TW-4000 dual bander $15

Service manual for TW-4000 dual bander $20

Operating manual for TH-21 A / AT HT for 2 meters $ 8

Operating manual for TH-41A/BT/E, TH-31A/BT, TH-21A/BT/E
HTs for 440 MHz, 220 MHz and 2 meters $10

Operating manual for TH-225, 2 meter HT - Good condition $12

Operating manual for TM-221/421 mobile $15

Operating manual for TH-241 / 441 / 541 mobile FM transceivers
For 2 meters, 440 MHz, and 1200 MHz. $ 12

Operating manual for TR-2200, 2 meter "portable"
This is very similar to the Drake TR-22. $15

Operating manual for TR-2400, 2 meter HT $12

Operating manual for TR-2500, 2 meter HT $14

Operating manual for TR-2600, 2 meter HT $12


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400