[Kenwood] RTTY es TS950

[Barry Fox]

Massimo,
I have been running FSK (NOT AFSK-audio frequency shift keying) on my
TS940SAT
for over 15 years.  I assume the TS950 works the same.  I am using MMTTY so
the
COMM1 RS-232 connector on my PC, pin 3 (TDAT/TXD) is connected to the RTTY
RCA
connector on my TS940.  On your TS950, it would go to FSK KEY connector
which
you have already identified.
You may or may not have to buffer/invert this signal, that would depend on
the
polarity of your PC and the keying requirements of the TS950.
Good luck,
73,
Barry - W1HFN






----------------------------------------------------------------------

Message: 1
Date: Sun, 27 Jul 2008 16:50:44 +0200
From: Massimo Corinaldesi <m.corinaldesi at mclink.it>
Subject: [Kenwood] TS950sdx and FSK
To: kenwood at mailman.qth.net
Message-ID: <200807271650.44238.m.corinaldesi at mclink.it>
Content-Type: text/plain;  charset="us-ascii"

I want to do a test on my TS950sdx: use the FSK mode.

Unfortunately, reading the user manual didn't helped too much: wat kind of
signal must I apply to the FSK socket ?

Thanks and 73
--
-----

Massimo  Corinaldesi I0MCF
http://www.ziomassimo.it