[Kenwood] Kenwood TH-41 HT and other Kenwood items FS

[Ken Simpson, W8EK]

Kenwood items for sale:

Kenwood TH-41 AT HT for 440 MHz.
This compact HT has thumbwheel switches to select the operating 
frequency. The HT has about 1.5 watts output, and a decent receiver. 
It has a touchtone pad on it, and is very simple to operate. You likely
will not need to read to manual to use this one!
This one has a battery case where one may insert six AAA batteries.  
This is very advantageous, as one may choose to use alkaline 
batteries, or some of the newer NiMH batteries that have much 
higher capacity.  It includes the battery case, stubby rubber duck, 
belt clip, and paper work for $60.

Kenwood MC-45 DM, DTMF mic plus other functions
In addition to the touch tone pad and PTT switch, this mic 
has up-down switches, plus a row of four switches above 
the touch tone pad.  They are used for "Call Button", VFO 
key, Memory recall key, and the fourth one is programmable. 
The back has a lock switch. It has an RJ-45 connector (like 
a computer LAN).
This particular mic works fine, and looks fine also.  It is still 
in its original box, with paper work for only $60.


Kenwood MJ-48 microphone connector adapter
Converts a round 4 pin Kenwood mic connector, so it can 
be plugged into a Kenwood rig with the round 8 pin 
connector. $20

Kenwood MJ-68 microphone connector adapter
Converts a round 6 pin Kenwood mic connector, so it can 
be plugged into a Kenwood rig with the round 8 pin 
connector. Like new. $20


Belt clip for TR-2400 HT, complete with hardware - $8

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks fine 
and works fine. $18

Battery charge cable for Kenwood TR-2400 HT
This is an adapter that permits one to charge the battery of the 
Kenwood TR-2400, 2 meter HT, outside of the HT itself. Usually, 
one must have the battery inside the HT, but this lets you charge 
a second battery outside of the HT. The original charger is used. 
It is in good shape, and works fine. $3

Wrist strap - I think it fits most Kenwood (and maybe other) HTs - $4

Antenna adapter to fit the BNC connector on the HT and provide 
an SO-239 connector that will permit a PL-259 to be attached. $5

Antenna adapter for Kenwood TH-21 / 31 / 41 HTs
This adapts the antenna connector found on these HTs to a 
standard BNC connector. $5

Special rubber duck antenna for Kenwood TH-21 HT with 
threaded connector
Aftermarket stubby, 3.5 inches long - $10
Kenwood RA-6 regular, 6.6 inches long - $12


Kenwood PC-1 phone patch 
This is the model with the 4 pin connectors, although
they can be changed, if needed. It includes a nice meter
for adjusting the null so VOX will work OK. 
This particular unit works fine, and looks very, very good. 
No scratches. With paperwork for $ 40 


Original Kenwood Manuals For Sale:

All manuals are in very nice, close to new
condition, for Kenwood radios, unless stated otherwise.

Operating manual for TW-4000 dual bander $15

Service manual for TW-4000 dual bander $20

Operating manual for TH-21 A / AT HT for 2 meters $ 8

Operating manual for TH-41A/BT/E, TH-31A/BT, TH-21A/BT/E
HTs for 440 MHz, 220 MHz and 2 meters $10

Operating manual for TH-225, 2 meter HT - Good condition $12

Operating manual for TM-221/421 mobile $15

Operating manual for TH-241 / 441 / 541 mobile FM transceivers
For 2 meters, 440 MHz, and 1200 MHz. $ 12

Operating manual for TR-2200, 2 meter "portable"
This is very similar to the Drake TR-22. $15

Operating manual for TR-2400, 2 meter HT $12

Operating manual for TR-2500, 2 meter HT $14

Operating manual for TR-2600, 2 meter HT $12


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400