[Kenwood] TS-830s IF Amp Alignment Question

[Fern Rivard]

Most japanese rigs use dbu which is even more confusion. I'm from the old school where we use uv microvolts.   Fern


----- Original Message ----- 
From: "Clif Holland" <clif at avvid.com>
To: <kenwood at mailman.qth.net>; "Steve Harrison" <k0xp at dandy.net>
Sent: Thursday, July 31, 2008 9:54 PM
Subject: Re: [Kenwood] TS-830s IF Amp Alignment Question


Why should I have to say it, it's plainly shown on their conversion chart.

They do things their way, not the way we do. A dB is a dB and they follow 
that it's just they have a different reference than we do.

Clif Holland KA5IPF
www.avvid.com




----- Original Message ----- 
From: "Steve Harrison" <k0xp at dandy.net>
To: "Clif Holland" <clif at avvid.com>; <kenwood at mailman.qth.net>
Sent: Thursday, July 31, 2008 10:39 PM
Subject: Re: [Kenwood] TS-830s IF Amp Alignment Question


> At 08:41 PM 7/31/2008 -0500, Clif Holland wrote:
>>That would be fine except for one thing. All of those charts are for the 
>>USA
>>usage of uV and dBM conversions. The Japanese sytem starts at 0dB =  .5uV,
>>not 1 uV as you are assuming.
>
> Oh ok, you didn't say that and it changes things a bit, of course.
>
> But by only a half S-unit.
>
> Steve, K0XP 

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net


-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 270.5.6/1574 - Release Date: 7/25/2008 4:27 PM