[Kenwood] Kenwood TS820

[Dave Edwards]

Well, if off...the voltage is off...no transmit.
Used for neutralizing finals.
...Dave
----- Original Message ----- 
From: "Joe LeKostaj" <k9ly at comcast.net>
To: <kenwood at mailman.qth.net>
Sent: Sunday, September 02, 2007 6:36 PM
Subject: Re: [Kenwood] Kenwood TS820


> Does this model have a SG (screen grid) switch on the back panel? I seem 
> to remember that the normal position is "off". If set to "on" the TX 
> output is greatly reduced. Check the manual to make sure.
>
> 73,
> Joe K9LY
>
>
> At 10:50 AM +1200 9/2/07, dogaen wrote:
>>Transmitter has very low output (about half a watt) but receiver working 
>>fine
>>  Replaced all the valves with no result.  Grid and screen voltage OK. 
>> Bias setting OK.  HT OK.
>>Can't get any ALC.
>>Does anyone have any ideas please?  I am at a loss as to what to try next.
>>
>>73's  Don     ZL1MN
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net