[Kenwood] TH-F6 Connectivity help needed

[Bill Jourdain, AB4BJ]

It may be that the USB/Serial adapter is not allowing the program to work.
I've had the same problem with two different USB/Serial adapters and the F6,
but the same Kenwood cable works fine when connected directly to serial.
I've also heard others say it's a problem with other Kenwood radios (i.e.
TM-D700A).  If you have access to a serial port you might want to try that
just to make sure the interface cable (sans USB adapter) is working
properly.

-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Drew Moore
Sent: Friday, October 12, 2007 7:31 PM
To: kenwood at mailman.qth.net
Subject: [Kenwood] TH-F6 Connectivity help needed

I am having some problem running the kenwood programming program.

I downloaded the software, Purchased the USB to serial adapter and 
configured that adapter for com1

I set the MCP software to com1.

In addition I set the port settings to com1, BPS to 9600, DB - 8, P - 
none, and FC - Xon/Xoff.

My problem is I still get the time out error message.

Has anyone had the same problem?

Drew/w2ou
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net