[Kenwood] Dead TS940

[Wally]

I know there arr two batteries in the rig. I think that I read someware that
if the battery (not for the display) dies the radio will not turn on. If
some one else can verify this go to the 940 web page and it tells how to
change the batteries. 
Wally W1IOO
 

-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Rick Brashear
Sent: Tuesday, June 05, 2007 8:14 PM
To: 'TPL III'; Kenwood at mailman.qth.net
Subject: RE: [Kenwood] Dead TS940

If there are no lights at all coming on I would check to be sure I had AC
through the power on/off switch as my next step.
Rick


-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of TPL III
Sent: Tuesday, June 05, 2007 6:49 PM
To: Kenwood at mailman.qth.net
Subject: RE: [Kenwood] Dead TS940


 Good ideas, but the outlet is live the cord is good, the primary and
secondary fuses are good. The send button is not engaged. All button have
been tested and set to where they should be for the initial power on.

Any other thoughts.


The obvious first; is it plugged in to an "live" outlet; is the fuse blown;
is there an internal secondary fuse.

Pete, wa2cwa


______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net