[Kenwood] Dead TS940

[TPL III]

 Good ideas, but the outlet is live the cord is good, the primary and
secondary fuses are good. The send button is not engaged. All button have
been tested and set to where they should be for the initial power on.

Any other thoughts.



-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Peter Markavage
Sent: Tuesday, June 05, 2007 7:08 PM
To: Kenwood at mailman.qth.net
Subject: Re: [Kenwood] Dead TS940

The obvious first; is it plugged in to an "live" outlet; is the fuse blown;
is there an internal secondary fuse.

Pete, wa2cwa

On Tue, 05 Jun 2007 18:27:23 -0400 TPL III <lisnak at optonline.net> writes:
> My TS940 will not power on after not being used for about a year. It 
> is my back up rig. It is not the timer switch. What else could I 
> check.
> 
> Thanks for any help.
> 
> Tony
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net