[Kenwood] Installing a 731 dualband in a 2006 Ford Taurus

[Brian K. Gaskamp]

Ken that sounds pretty good, now that brings up another question.
If I do that is there a spot somewhere that's has a direct connection to 
battery where I could hook up to that's always on.

Thanks for the tip, never would have looked on the passenger side.

73,
Brian
----- Original Message ----- 
From: "Ken Sheehan" <ksheehansprint at earthlink.net>
To: "'Brian K. Gaskamp'" <ka5bkg at sbcglobal.net>
Sent: Thursday, August 09, 2007 9:07 PM
Subject: RE: [Kenwood] Installing a 731 dualband in a 2006 Ford Taurus


> Brian,
>
> Most, not all Fords have a grommet just behind the carpet near the top of
> the left side.  Peal back some of the carpet on the passenger side near 
> the
> top you should see a grommet.  Pop it out and put a coat hanger thru.  Go 
> to
> the engine compartment and look for you coat hanger.  Put something on the
> end that will be quite visible.  Good luck, let me know if that worked.
>
> Kindest regards,
> Ken
> KD0AGV
>
> -----Original Message-----
> From: kenwood-bounces at mailman.qth.net
> [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Brian K. Gaskamp
> Sent: Thursday, August 09, 2007 5:53 PM
> To: kenwood at mailman.qth.net
> Subject: [Kenwood] Installing a 731 dualband in a 2006 Ford Taurus
>
> Anybody ever run the power cable for this radio on a Ford Taurus, need 
> some
> suggestions on where I can run the cable.
>
> That firewall looks pretty wicked, not as easy as I thought it might be.
>
> Its going in the wife's car, and have been told cannot drill any holes!
>
> Suggestions...
>
> 73,
> Brian
>
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
>
>