[Kenwood] Kenwood - masking tape = ?

[Bill Gode, Sr.]

Soak the tape with WD-40 and wait.  After an hour or two, you should be able to 
peel off the old tape and adhesive.  If necessary, you can use a piece of 
plastic to scrape off the residue, but do NOT use anything sharp, or made of 
metal!

73,

Bill, W9NHQ


----- Original Message ----- 
From: "Mike D." <hrg at cifnet.com>
To: <kenwood at mailman.qth.net>
Sent: Thursday, April 19, 2007 2:31 PM
Subject: [Kenwood] Kenwood - masking tape = ?


> Can someone recommend a method of removing old masking tape from a Kenwood
> cabinet without destroying the paint? Actually, the tape curled up and
> what's left is the glue.
>
> Thank you.
>
> 73 de Mike, N9BOR
> A-1, FISTS, JARL A-1, SMC
> http://www.n9bor.us
> http://www.k9ya.org
>
> di dah dit - The only Roger Beep you'll ever need.
> Let your fingers do the talking - Morse code.
> My designated driver is a 12BY7A.
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
>