[Kenwood] RE: kenwood TS-950SDX

[Hsu, Aaron (NBC Universal)]

Word of warning...

If I remember correctly, Cliff from Avvid warned to never enter the
"service" menu as some settings are reset to default just by entering
the mode.  This implies that the radio would no longer be operating at
"optimum" or possibly out of alignment.  He never posted any "service
menu" power-on key combinations due to this and always informed people
not to do it without just cause.

Ilya, this might explain why the radio dropped to 100 watts - it might
be the "default" setting of the 950.  Hopefully, no other settings in
your particular 950 were affected, but you can't tell unless you have
test equipment to verify.

73,

  - Aaron, NN6O


-----Original Message-----
From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Ilya Zamedlin
Sent: Friday, March 03, 2006 7:13 AM
To: Kenwood at mailman.qth.net
Subject: Re: [Kenwood] kenwood TS-950SDX


My observation
If you come into the service menu(3+9 and power switch on), the power is
dropped to 100 watts, Even if to not touch an position 9 (100/150w),
before an exit it is necessary to choose from the service menu In an
position 9 - 150, and then to switch off or clr key

73! Ilya , RA4CTR


> James has a good question. I have had a number of
> 950sdx's and for some reason the vr that controlls
> output seems to get stingy after a number of years. I
> have seen them drop down to 90 watts. A little tweak
> on the old vr and it zooms back up to 150.  best 73
> paul w8jn
>
>
> >james rich wrote:
>  > Can someone tell me how to turn up the output
>  power of this radio,,I'm not sure what VR to  turn,,,Thanks,,James //

> N4CTR
> >
> >
> >



______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net