[Kenwood] help on DSP-100 Kenwood

[Rob Atkinson, K5UJ]

Hi Pat,

The first thing I would do is get copies of the service and operator manuals
for the DSP100.  Before you attempt to do anything you should have the
manuals on hand.  I think the operator manual is available on the internet.
If you google kenwood DSP-100 or something like that it should come up
(eventually).  The service manual is harder to find.  What I did was order
both as reproductions from W7FG.  They are useable reproductions and are
full sized and not terribly expensive.   You can find out more at
http://www.w7fg.com       They are comb bound and even the fold out pages
were full sized, and they were here in a few days so they are prompt once
they get your order.

Reading the manuals on how to operate the dsp-100 should give you some ideas
of things to try.  If you still have questions you can come back and ask
them but hopefully some of your problems will be taken care of once you have
the information in the manuals.

73,

Rob/K5UJ


----- Original Message -----
From: "roadrunner" <roadrunner069 at skynet.be>
To: <kenwood at mailman.qth.net>
Sent: Tuesday, June 28, 2005 4:40 PM
Subject: [Kenwood] help on DSP-100 Kenwood


> Hello,
>
>
>
> I own a DSP-100 and i am not able to make it work with my TS850sat :
>
>
>
> ==>     I don't have the manual so do I have to make change to the
switches
> on the rear panel ??
>
> ==>     It work well on SSB reception only in LSB on 3,5Mhz and 7 Mhz but
> sound very bad when I change
>
> To USB on the 14, 21 and 28 Mhz bands !!! I don't know how to correct that
.
>
> ==>     I can transmit only in SSB and use the mike gain of the dsp for
make
> good level but i can
>
> Not do the same on CW : impossible to make the carrier level with the
> carrier button on the dsp !!
>
> ==>     where do I have to connect my if-232c than I must have release to
> give the connector to the dsp ??
>
>
>
> I need help because it is very hard but also very discourage to can not
use
> this dsp !!!!
>
>
>
> Many thanks to everybody !!
>
>
>
>                                                             Pat  ON5SV
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
>
>