[Kenwood] SM-230

Thu, 11 Mar 2004 16:06:13 -0800

Ok Mike,

I changed the setting to match your sug. and still have no joy. :'(

Now I have noticed that if I press the "sub" button on the radio there
will be a "blip" show up on the trace line that moves as I turn the
"sub" knob. The blip is not much more that a fuzzy dot in the trace.

Thanks for your help.

John
----- Original Message ----- 
From: "M. Whiteman" <[email protected]>
To: "John Luthy" <[email protected]>
Sent: Thursday, March 11, 2004 2:45 PM
Subject: Re: [Kenwood] SM-230

> Hi John.
> I use a SM230 with my 850.
> My settings are -  SCAN SPEED "Auto", RF ATT at "min" (this is
probably
> where you are having problems), ATT at 1 (not 1/10 or 1/100 -
attenuates
> signal to 1/10 or 1/100 of input - possible other problem area).
That should
> make it work.
> The other  buttons deal with signal width and position ion the
screen.
> Let me now if you are still having problems.
>
> Mike ZF1MW
>
> ----- Original Message -----
> From: "John Luthy" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, March 11, 2004 11:40 AM
> Subject: [Kenwood] SM-230
>
>
> > Hello to the group,
> >
> > I have here a 950s and a SM 230 that I am trying to learn to use.
I
> > have been able to see the TX wave form and have seen the effects
of
> > improperly adjusted audio on the wave form. Very intersting.  I am
> > having a bit of trouble using the band scope function,  I have the
> > cable that goes between the radio and scope connected but I dont
seem
> > to be able to see recived signals. I suspect that my problem is
> > operator error. So what am I doing wrong?
> >
> > John
> > N7JL
> >
> > - - -
> >
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
> >
>
>