[Kenwood] TS-820S bandswitch coupler replacement successful

[Tom McDermott]

	Thanks to all for help in locating replacement parts and the correct
part number for the TS-820S plastic bandswitch coupler, took about hour and
a half to replace it. On the TS-820, the front panel has to come off and the
secondary shaft slipped forward through a hole in the sub chassis. The flats
on the two coupled bandswitch shafts align with each other; this is not
described in the service manual.

	 For those who missed the original posts, the part number for the
coupler is D22-0409-05 at www.kenwoodparts.com and the setscrews are 1.5mm
hex.

	Radio seems to be working normally again.

	-- Tom, N5EG