[Kenwood] TM-241A with a problem

[Clif Holland]

D-209 on the control board determines if the radio is a 241 or a 441. In the
past I have found a bad trace from D-209 to Pin 60 of the UPC. This causes
the radio to think it is a 441. Most likely something got damaged in the
battery replacement.

Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
----- Original Message ----- 
From: "Reed Park" <reedpark at nbnet.nb.ca>
To: <kenwood at mailman.qth.net>
Sent: Sunday, June 06, 2004 10:21 AM
Subject: [Kenwood] TM-241A with a problem


>
> Hi Group
>
> Buddy of mine acquired a very nice Kenwood TM-241A (2 meter) with a
problem.
>
> The lithium battery was changed by the previous owner, and now the radio
comes
> up as a UHF (70 cm)...
>
> No amount of resetting or fiddling, including removing the backup battery
> will restore the radio to 2m. Anyone have any ideas ?
>
> 7 3
> Reed   -   VE1NU
>
> --
>
> ARROW Research   -   Avro CF-105
> Reed Park
> 252 Gauvin Road
> Dieppe, New Brunswick
> E1A 1M1
>
> Amateur Radio VE1NU
> 19 set user and paraset replica builder
>
>
>
> _______________________________________________
> Kenwood mailing list
> Kenwood at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/subscribers.htm
>
>