[Kenwood] TS850S/AT hot transmit

Sat, 10 May 2003 09:34:24 -0400

Hello Ed,

Clif probably has it right - be sure to release the locking PTT bar on the mic.  The other possibility is that you have the VOX turned on, and the sensitive mic and VOX gain might be high enough to key the radio on your room's ambient noise.  So, also check your VOX...

Alan

Edward Wilkinson wrote:

>    Recently I tried my TS850 to see if the battery backup system was still operational. When I turned the 850 on then the MC85 power the transmitter immediately began transmitting. This only happens only with the MC85 preamp mic plugged in. With the standard MC43 mic it doesn't do this. Any ideas where to start looking? I also noticed the audio seems a bit weak, but that just may be the 850 vs. the 950 and my hearing.  Thanks for the help!    N1EW
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood

--
Alan Wolke, W2AEW
"i usta cuDn't speL enjinere, noW i ar wuN"