[Kenwood] 850 Filter Question
João Lopes
[email protected]
Sun, 16 Mar 2003 22:08:50 -0000
Hi.
This was pasted from http://www.mods.dk:
---
When adding additional filters, is is necessary to set the corresponding
switch on. Under the hatch on top, is a 4 position dip switch. The manual
shows a picture of it, but makes no mention of their settings. This switch
is necessary to inform the micro- processor of the filters' absence or
presence. ON is for presence, OFF is for absence. Below is the switch
diagram:
-----
| 4 | <-- YK-88C-1, YK-88CN-1, YK-88SN-1
| 3 | <-- YK-88CN-1, YK-88CN-1, YK-88SN-1
| 2 | <-- No Function
| 1 | <-- YG-455C-1 or YG-455CN-1
-----
O O
N F
F
---
You should set 3 and 4 ON. Set 1 and 2 OFF. Number 2 is not used, so ON
should also be ok,
Let me know if you have any trouble since in my TS-850SAT I have all 3
positions with:
Position 1: YK-88C-1
Position 2: YK-88SN-1
Position 3: YG-455C-1
73s.
John, CT2HME
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of wjdiamond
Sent: Sunday, March 16, 2003 8:18 PM
To: [email protected]
Subject: [Kenwood] 850 Filter Question
Hi Kenwood Folks,
I was recently thrust into 21st century equipment by the attitude of
Collins collectors and I have a question about my new to me TS 850 SAT.
I have installed the YK88C and YK88SN filters in it, in positions 1 and 2.
I am having a hard time figuring out which of the 4 switches to turn on. No
1 shows the C and the CN and position 4 is for the YG 455 filter. So do I
turn on position 2 for the YK 88SN ?
Thanks
William J. Diamond (Bill)
Rogers, Arkansas USA
[email protected]
Ham Radio Operator WRØT
Flying The Flag Long Before
It Was Popular
Please Visit My New Radio Page
http://pages.sbcglobal.net/wjdiamond/index.html
- - -
Your moderator for this list is:
Larry Wilson KE1HZ [email protected]
_______________________________________________
Kenwood mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/kenwood