[Kenwood] RM-1 Controller

Mon, 10 Mar 2003 19:44:36 -0000

Hi Kelly,

if the RM-1 is not required, then:

without using the RM-1 (using only the keys on the TS-950SDX front panel)
can you please explain me how to:

1. Record and Playback a CW message.

2. Record and Playback a VOICE message (assuming the DRU-2 is installed).

I´m allways ready to learn. :)
Thanks.
73s.

John, CT2HME

-----Original Message-----
From: Kelly Taylor [mailto:[email protected]]
Sent: Monday, March 10, 2003 12:26 AM
To: João Lopes; Darrell Drake; [email protected]
Subject: Re: [Kenwood] RM-1 Controller

The RM-1 is NOT required to playback or record voice or CW memories. It
merely duplicates in remote form the functions already supported on the
front of the radio.

The RM-1 will activate any functions supported, including DRU-2 activation,
but it is not required for DRU-2 operation nor is DRU-2 required for RM-1
operation.

73, kelly
ve4xt
----- Original Message -----
From: "João Lopes" <[email protected]>
To: "Darrell Drake" <[email protected]>; <[email protected]>
Sent: Sunday, March 09, 2003 4:59 PM
Subject: RE: [Kenwood] RM-1 Controller

> Hi.
> On the TS-950SDX:
>
> CW messages are supported without the DRU-2.
> VOICE messages are supported only if the DRU-2 is installed.
> The RM-1 is required to PLAY/REC both CW and VOICE messages.
> Please see:
>
> TS-950SDX manual, page 18:
> "4-1-2 Quick Key Board RM-1 (Accessory)
> ...
> 3. PLAY-1/REC-1, PLAY-2/REC-2, PLAY-3/REC-3 keys (RM-1 keys)
> These keys are used to record CW or SSB messages.
> Use the REC/PLAY switch to select the REC or PLAY mode.
> ..."
>
> TS-950SDX manual, page 44:
> "4-6 CW Message Function
> CW messages to be transmited can be recorded and played back.
> ...
> 4-6-1 Data Entry
> ...
> 4. Set the REC/PLAY switch on the Quick key board (RM-1) to REC
> 5. Press REC1, REC2, or REC 3.
> ...
> "
>
> TS-950SDX manual, page 45:
> "4-7 Voice Recording Using DRS Function
> (When the optional DRU-2 digital recording unit is installed)
> ...
> 4-7-1 Recording Method
> ...
> 4. Set the REC/PLAY switch on the Quick key board (RM-1) to REC
> 5. Press REC1, REC2, or REC 3.
> ..."
>
>
> 73s.
>
> John, CT2HME
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Darrell Drake
> Sent: Sunday, March 09, 2003 10:29 PM
> To: [email protected]
> Subject: Re: [Kenwood] RM-1 Controller
>
>
>     I have a TS-950SDX with the RM-1 remote keyboard. If you want to use
> it to record/playback VOICE msgs., you will also require the optional
> DRU-2 digital recording unit. However, I don't believe the DRU-2 is
> required to record/playback CW msgs.
> Darrell,
> VA3DG/VE3DDG
> ----- Original Message -----
> From: "A N Other" <[email protected]>
> To: "NR1DX" <[email protected]>
> Cc: <[email protected]>; <[email protected]>
> Sent: Sunday, March 09, 2003 9:33 AM
> Subject: Re: [Kenwood] RM-1 Controller
>
>
> >
> > The '93 Catalog charts the RM-1 as included with the TS950SDX
> > and was optional with the TS850.
> >
> >
> >
> > Wayne
> > VE3EFJ
> > - - -
> >
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood