[Kenwood] RM-1 Controller

Sun, 9 Mar 2003 20:55:46 -0500

True, the RM-1 does duplicate some of the functions already on the front
panel of the radio, BUT after really studying the front panel of my
950SDX, I can see no buttons to allow me to record or play back CW or
Voice.
Also, I've only had the radio since June 2002, so I'm still learning all
its features. In all seriousness, please enlighten me as to how this can
be done.
Darrell,
VA3DG/VE3DDG
----- Original Message -----
From: "Kelly Taylor" <[email protected]>
To: "Jo�o Lopes" <[email protected]>; "Darrell Drake"
<[email protected]>; <[email protected]>
Sent: Sunday, March 09, 2003 7:26 PM
Subject: Re: [Kenwood] RM-1 Controller


> The RM-1 is NOT required to playback or record voice or CW memories.
It
> merely duplicates in remote form the functions already supported on
the
> front of the radio.
>
> The RM-1 will activate any functions supported, including DRU-2
activation,
> but it is not required for DRU-2 operation nor is DRU-2 required for
RM-1
> operation.
>
> 73, kelly
> ve4xt
> ----- Original Message -----
> From: "Jo�o Lopes" <[email protected]>
> To: "Darrell Drake" <[email protected]>; <[email protected]>
> Sent: Sunday, March 09, 2003 4:59 PM
> Subject: RE: [Kenwood] RM-1 Controller
>
>
> > Hi.
> > On the TS-950SDX:
> >
> > CW messages are supported without the DRU-2.
> > VOICE messages are supported only if the DRU-2 is installed.
> > The RM-1 is required to PLAY/REC both CW and VOICE messages.
> > Please see:
> >
> > TS-950SDX manual, page 18:
> > "4-1-2 Quick Key Board RM-1 (Accessory)
> > ...
> > 3. PLAY-1/REC-1, PLAY-2/REC-2, PLAY-3/REC-3 keys (RM-1 keys)
> > These keys are used to record CW or SSB messages.
> > Use the REC/PLAY switch to select the REC or PLAY mode.
> > ..."
> >
> > TS-950SDX manual, page 44:
> > "4-6 CW Message Function
> > CW messages to be transmited can be recorded and played back.
> > ...
> > 4-6-1 Data Entry
> > ...
> > 4. Set the REC/PLAY switch on the Quick key board (RM-1) to REC
> > 5. Press REC1, REC2, or REC 3.
> > ...
> > "
> >
> > TS-950SDX manual, page 45:
> > "4-7 Voice Recording Using DRS Function
> > (When the optional DRU-2 digital recording unit is installed)
> > ...
> > 4-7-1 Recording Method
> > ...
> > 4. Set the REC/PLAY switch on the Quick key board (RM-1) to REC
> > 5. Press REC1, REC2, or REC 3.
> > ..."
> >
> >
> > 73s.
> >
> > John, CT2HME
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On Behalf Of Darrell Drake
> > Sent: Sunday, March 09, 2003 10:29 PM
> > To: [email protected]
> > Subject: Re: [Kenwood] RM-1 Controller
> >
> >
> >     I have a TS-950SDX with the RM-1 remote keyboard. If you want to
use
> > it to record/playback VOICE msgs., you will also require the
optional
> > DRU-2 digital recording unit. However, I don't believe the DRU-2 is
> > required to record/playback CW msgs.
> > Darrell,
> > VA3DG/VE3DDG
> > ----- Original Message -----
> > From: "A N Other" <[email protected]>
> > To: "NR1DX" <[email protected]>
> > Cc: <[email protected]>; <[email protected]>
> > Sent: Sunday, March 09, 2003 9:33 AM
> > Subject: Re: [Kenwood] RM-1 Controller
> >
> >
> > >
> > > The '93 Catalog charts the RM-1 as included with the TS950SDX
> > > and was optional with the TS850.
> > >
> > >
> > >
> > > Wayne
> > > VE3EFJ
> > > - - -
> > >
> > > Your moderator for this list is:
> > > Larry Wilson KE1HZ [email protected]
> > >
> > > _______________________________________________
> > > Kenwood mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/kenwood
> >
> > - - -
> >
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
> >
> > - - -
> >
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood