[Kenwood] cw interface for ts830s

Mon, 16 Jun 2003 12:54:06 -0500

Does the cable plug into the key jack?  If so, you will need an adatper for
blocked-grid keying.   The 830 requires a large negative voltage to trip the
keying circuit.  I was able to purchase an inexpensive kit from
http://www.radioadv.com/ham_radio_equipment/Accessories/BK170.htm .

I hope this helps.

73
Michael
WN5T

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of pp5jr
Sent: Sunday, June 15, 2003 2:43 PM
To: [email protected]
Subject: [Kenwood] cw interface for ts830s

need some help please!
I have a kenwood  ts 830s, and i'd like to know how can i use the lpt1 to
make cw with this radio.
i have a cable that i use in yaesu perfect, but dosen't work in the kenwwod.
I made the cable with the specifications that i saw in k1ea page, but for
kenwood i think there is a special skill.
please some help,
sergio pp5jr

>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>

- - -

Your moderator for this list is:
Larry Wilson KE1HZ [email protected]

_______________________________________________
Kenwood mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/kenwood