[Kenwood] 14volt fuse lamps

[Peter A Markavage]

I can also echo John's comment. The 12 volt fuse type lamps from Parts
Express work fine in the Kenwood R-599 series. A little brighter than the
original lamps but not that bad. If it's too bright for you, add a 10 to
20 ohm resistor in series with the lamp. I replaced my original lamps
with these lamps about 2 years ago with no problems. You can also use the
8 volt fuse type lamps from Parts Express in the T599 series.
Pete, WA2CWA

On Thu, 5 Jun 2003 19:56:36 -0400 "John" <hydroaction@cfl.rr.com> writes:
> Bill
>    Go to Parts Express ......They have what you are looking for , 
> the
> address is below
> 
> 73 John