[Kenwood] Need Help with T599A Function switch.

[Cqk1jeb@aol.com]

Hi all,

I just got a R599A/T599A twins set.
The previous owner had removed the function switch from the T599A 
transmitter.
The original function switch arched and was ruined (will need to find this 
problem as well). The problem is that the previous owner had completely 
removed 
the switch without re-soldering the wires one at a time from the old switch 
to 
the new one. After not returning to the project for a few month he could not 
remember what wires went to which lugs on the new switch.

I wish to tackle this challenge but could use some help either with a wiring 
diagram (if one exists) or some other way for help. I do have a T599 (non-A). 

Is the non-A switch wired the same? If so this would be a great help! I could 

use it for a visual comparison.

Regards,
JohnB
K1JEB



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---