[Kenwood] (no subject)

Wed, 15 Jan 2003 10:33:05 -0800

Hello Richard,
  To use the band scope with the pan adapter, you don't hook up the BNC
cables, just connect the IF out of the 940 to the back of the pan adapter.
They are RCA phono jacks.  You can use a phono cable.  Coaxial shielded is
best, but even twisted pair with your own soldered plugs work fine.

73
Roy

> -----Original Message-----
> From:	RROSENTHALL [SMTP:[email protected]]
> Sent:	Wednesday, January 15, 2003 7:18 AM
> To:	[email protected]
> Subject:	[Kenwood] (no subject)
> 
> Hi Guys.----- I just got an SM 220 with pan adaptor to go with my TS
> 940S/AT. So far I haven't used it because I still have to make up a
> cable with a BNC connector at one end. However, I've been following
> the exchango of info. that's been going on and I find it very
> interesting. Is there anything special that I have to know when
> operating it in the bandscope mode ??
> 
> Tnx.  Richard VE3MG
> 
> - - -
> 
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> 
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---