[Kenwood] TM-261 mic help :Thanks John

Dan Baker [email protected]
Fri, 3 Jan 2003 22:20:04 -0800


Thanks John,
I found the archive, checked it and found the info so I will make the mod
and it should work.

                               73,   Dan
----- Original Message -----
From: "John Luthy" <[email protected]>
To: <[email protected]>
Sent: Friday, January 03, 2003 10:01 PM
Subject: Re: [Kenwood] TM-261 mic help


> Dan ,
>
> You just missed a thread on this very subject.
> Maybe K0CQ will repost his copyrighted response from 12/30/02
>
> Or if there are archives for this forum you may find it there.
>
> But first thing to do is to toss the spring. for the button return. I
> have had mine for
> two years of heavy use and just now starting to see intermintent ptt.
> Will try the K0CQ
> fix on mine.
>
> John
> KF6QCQ
> ----- Original Message -----
> From: "Dan Baker" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, January 04, 2003 5:47 AM
> Subject: [Kenwood] TM-261 mic help
>
>
> > Hello,
> > I have a TM-261 with that big kind of square backlitghed dtmf mic
> that comes
> > with it. I have also had one of there duel bands with this mic. They
> seem to
> > break easy and are kind of difficult to use. Anyway with both of
> them the
> > switch has gone bad. These are kind of hard to get to. I shot deox
> in there
> > but they are just dead. So does anyway have a good fix for these
> things?
> > Surly a lot of you have had the same problem so I am wonder what the
> rest of
> > you have done. Thanks for your help.   73,   Dan  KM6CQ
> > ----------------------------------------------------------------
> > Dan Baker- Amateur Radio Station KM6CQ
> > Antelope, CA
> > http://www.qsl.net/km6cq/
> > http://www.pineycreekweasels.com/
> > FAX: 801-761-6406
> >
> >
> > - - -
> >
> > Your moderator for this list is:
> > Larry Wilson KE1HZ [email protected]
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood