[Kenwood] TS 850s/AT display problem

Wed, 24 Jul 2002 21:00:27 -0300

	Hello Dean, check display pc board, for an intermittent connection at
or near a +B supply filter electrolytic. It may be leaking and this
corrodes the area.

Good luck
Guillermo - LU8EYW.

"Dean M. St. Hill" escribi�:
> 
> Dear Group
> 
> I have a TS850s/AT which seems to work very well except for quite
> frequently, the display starts to blink and become intermittent while tuning
> across the bands. At first it was only on 15m, but in the last week or so,
> it has been happening nearly everytime the radio is used.
> 
> I thought it may have been an overheating situation, but I've put a couple
> muffin fans on it, without the problem going away.
> 
> The important thing is that neither the RX nor the TX is adversely affected,
> and the readout on the computer under computer control remains perfect.
> 
> Could this be either a power supply under voltage or actual display low
> voltage situation???
> 
> Thanks for your help.
> 
> Dean - 8P6SH
> 
> - - -
> 
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> 
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood