[Kenwood] Kenwood TS-930s

Thu, 31 Jan 2002 13:18:42 +0000

John

Check the following  and email me back

1) What is the serial number of the radio?

2) In SSB mode try it on 75M and then on 10M in other words is the problem 
noticeably worse on 10M than on 75M. If this is the case you may find that 
even CW output on 10M is a problem as well.

Depending on the answer to these two questions I may know what the problem 
is....

Dave
NR1DX

>My kenwood 930s has performed great but i have not used ssb for the past
>month or so. I have been on cw and when i tried ssb this morning i have
>maybe 20 watts output on peak. Switching to cw i have full power output.
>Now, on ssb the mic gain control along with the driver are at maximum
>gain.Still very very low output. In fact, so low i cannot even trip the vox.
>  I switched mikes and the same problem.
>Anyone have any ideas on what is happening or what i could check?
>thanks
>john
>
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>
>_______________________________________________
>Kenwood mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/kenwood