[Kenwood] TS950SDX filters

Sun, 27 Jan 2002 20:11:32 +0000

Tony

you have to "rewrite the set menu". the complete instructions are on page 
58 of the operating manual .

In brief:

Hold down the ENT button while powering the radio ON
use the MCH/VFO.CH knob to select  MENU #1
the use the UP/DOWN buttons to toggle the 8.83 MHz / 270 Hz filter ON

Dave
NR1DX

At 12:12 PM 1/27/02 -0700, tony field wrote:
>I have recently acquired a TS950SDX.  After adding the 250Hz cw
>filters in both the 8mHz and 455kHz positions, the radio will
>select all possible filter combinations in cw mode for the 455kHz
>position including 250 Hz.  It will NOT allow the selection of
>250 Hz in the 8 mHz section.
>
>How do you enable the ability to select 250 Hz in the 8 mHz
>filter system???
>
>Tony Field (VE6YP)
>[email protected]
>http://members.shaw.ca/ve6yp
>"The difference between genius and stupidity
>is that genius has it's limits."
>
>
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>
>_______________________________________________
>Kenwood mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/kenwood