[Kenwood] FS: Inrad filters for Kenwood

[Ken - VE5KC]

Hi Sam.. 

That number is correct for the 1.8 Khz filter.. 

According to the chart I used that filter to would also fit the same radios
if you want the 1.8 Khz filter.. 

TS-450/690, TS-850/950, TS-570, TS-930/940
TS-820/R820, R-5000, TS-120S/130/180/530
TS-430/440, TS-830

The reason I say "check your manual" is that I am not 100% sure that the
information I got was correct..

I know that these filters were used in a TS-850 before I bought them. the
owner sold the radio to someone that didn't want the radio.. I am selling
them because I bought a new radio and no longer need the filters..

73 . . Ken - VE5KC

*********** REPLY SEPARATOR  ***********

On 8/28/2002 at 5:39 AM Sam Lanham wrote:

>My book (for my new TS570D(G) calls for filter # YK-88SN-1 (1.8 khz) 
>Sam W8VVE Cross Lanes, WV 25313
>

>On Tue, 27 Aug 2002 21:42:01 -0600 "Ken - VE5KC" <ve5kc@sasktel.net>
>writes:
>> For Sale the following Inrad Filters
>> ========================
>> 
>> SSB Filter
>> 
>> IR 88H2.1C  - 2.1 Khz (8830.0 Khz)  
>> [replacement for the YK-88S-1 - 2.4 Khz Kenwood filter]
>> 
>> For the following rigs (check your manual)
>> -----------------------------------------
>> TS-450/690, TS-850/950, TS-570, TS-930/940
>> TS-820/R820, R-5000, TS-120S/130/180/530
>> TS-430/440, TS-830, 
>> 
>> $50.00US plus shipping
>> ---------------------
>> 
>> CW Filter
>> 
>> IR 88H400AC - 400 Hz (8830.0 Khz)
>> [replacement for the YK-88C-1 - 500 Hz Kenwood filter]
>> 
>> TS-450/690, TS-850/950, TS-570, TS-930/940
>> 
>> $50.00US plus shipping
>> -----------------------
>> 
>> 73 . . .  Ken - VE5KC -  ve5kc@qsl.net
>> 
>>   KC's Amateur Radio Site - http://www.qsl.net/ve5kc/
>>  Canada Page - http://our_canada.tripod.com/
>> 
>> Webmaster- MM Hamsoft - http://www.qsl.net/mmhamsoft/ 
>> (MMTTY, MMSSTV, MMANA & DSPfilter)
>>