[Kenwood] 430

[jhinkle@att.net]

I have a ts-430 that was repaired about 1 years ago, 
because of the relays going bad on the filter board.
Well, now it has failed again...completely..receiving
only on 3.5, 7 and 10 mhz. Also, when in the memory
mode, mostly in the channel 4 position a relay keeps 
dropping out, it makes quite a lot of noise. I have 
cleaned the relays on the filter board(4 had been 
replaced) and you can hear them switch on, but still no 
receiver improvement. Any ideas?

73, Jim W4KWD