[Kenwood] TS-520S Tight Tuning Knob

Thu, 8 Aug 2002 16:53:03 -0700 (PDT)

I've never had the problem, but you will need to find
out where it is binding.  If you remove the tuning
knob, and the metal dial behind it, you will see a
bushing secured to the chasis by two screws.  Start
there and trace backwards until you find the binding
point.  Once you have the root cause of the binding,
the solution may be obvious.

73 de Gary
WA1TJB

--- John Campbell <[email protected]> wrote:
> The tuning knob on my recently purchased TS-520S is
> somewhat tight to turn, the frequency is a little
> unstable when it gets tight, and sometimes the
> received signal is also lost until I gently wiggle
> the knob.  Radio works perfectly otherwise.  Any
> suggestions or comments?  
> Thanks and 73, John, K5ENA
> 
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post
> was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> - - -
> 
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> 
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood

__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com