[Kenwood] Kenwood 922 vs. 922A value

[JV]

Paul
         You beat me to it. My 922A didn't have the parts either. With out 
pulling the manual, I think a choke, diode and resistor were required but 
don't hold me to that.
JV

At 09:27 AM 03-08-02 -0400, Paul McInnish - Home wrote:
>Don... Dave... sorry, but Dave is wrong!  I have a TL-922A, was purchased
>brand new and taken out of the box by me and the 10 meter components were
>NOT there and all components had to be installed... they simply were not
>there.
>
>A friend @ Kenwood says there never was a TL-922 introduced into the USA
>market... only the TL-922A.
>
>Paul - K4BET
>
>----- Original Message -----
>From: "Dave" <nr1dx@arrl.net>
>To: "Donald Gieszelmann" <w0dg@kc.rr.com>; <kenwood@mailman.qth.net>
>Sent: Saturday, August 03, 2002 9:18 AM
>Subject: Re: [Kenwood] Kenwood 922 vs. 922A value
>
>
>Don
>
>Pretty much the same amp, in either case you want to be sure that the amp
>has had 10M enabled. As I recall the 922 didn't come with the 10M parts
>installed (but the holes were all drilled etc. ). the 922A had the 10M
>parts installed, but the "stop" on the band switch had to be removed to
>switch to the 10M position.