[Kenwood] Kenwood 922 vs. 922A value

Sat, 3 Aug 2002 09:27:24 -0400

Don... Dave... sorry, but Dave is wrong!  I have a TL-922A, was purchased
brand new and taken out of the box by me and the 10 meter components were
NOT there and all components had to be installed... they simply were not
there.

A friend @ Kenwood says there never was a TL-922 introduced into the USA
market... only the TL-922A.

Paul - K4BET

----- Original Message -----
From: "Dave" <[email protected]>
To: "Donald Gieszelmann" <[email protected]>; <[email protected]>
Sent: Saturday, August 03, 2002 9:18 AM
Subject: Re: [Kenwood] Kenwood 922 vs. 922A value

Don

Pretty much the same amp, in either case you want to be sure that the amp
has had 10M enabled. As I recall the 922 didn't come with the 10M parts
installed (but the holes were all drilled etc. ). the 922A had the 10M
parts installed, but the "stop" on the band switch had to be removed to
switch to the 10M position.

Only widely reported  known trouble spot in the either amp are burned band
switch contacts. Turn the amp upside down remove the bottom cover, take a
small flash light and carefully inspect the ceramic band switch.  Up until
recently I owned two 922A's (sold one a month ago ...saving for a ACOM 2000)

In general operationally two things to watch for.
1) watch your grid current ( don't overdrive it) high grid current = short
tube life
2) PTT input has +100v on it and should be switched with a relay or a HV
transistor.

At 07:24 AM 8/3/02 -0500, Donald Gieszelmann wrote:
>Hi Group,
>
>Is there any particular difference in value between the 922 vs. a 922A ?
>Any thing to watch for ?
>
>Thanks
>
>Don    w0dg
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>
>_______________________________________________
>Kenwood mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/kenwood

Dave
NR1DX
[email protected]

"A man who picks a cat up by the tail learns a lesson he can learn no other
way" .... Mark Twain

- - -

Your moderator for this list is:
Larry Wilson KE1HZ [email protected]

_______________________________________________
Kenwood mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/kenwood