[Kenwood] TS-940s questions

[Paul Erickson]

Thanks to those who responded. Turns out that replacing the
battery, and pressing the internal reset button, rather than
the A=B power off, power one procedure, solved the problem.

Thanks again.

cheers, Paul

jhinkle@att.net wrote:

> Its not the battery, all that would effect is the
> memories you have stored. Open the rig and carefully
> unplug and clean as many of the mini connectors as
> you can, and I think it will resolve the problem.
> 
> 73, Jim W4KWD
> 
>>Today, after an extended period of disuse, I turned on my ts940s, and
>>everything was fine, except the green lcd display. All the functions
>>seemed to be normal, but after I attempted a cpu reset, it made things
>>worse. Now, sometimes none of the pushbutton functions work, and there
>>is no receive audio. The frequency display works in all cases, but
>>sometimes, I am unable to change bands, modes, vfo's etc.
>>
>>I suspect the lithium battery is shot. Anything else I should be
>>looking at?
>>
>>Thanks in advance.
>>
>>-- 
>>cheers, Paul - VA7NT (ex VE7CQK) - email: paule@sfu.ca
>>
>>"Those who hear not the music, think the dancers mad..."



-- 
cheers, Paul - VA7NT (ex VE7CQK) - email: paule@sfu.ca

"Those who hear not the music, think the dancers mad..."