[KCDXC] WPX Update

[Tom Baugh]

Everything is right on Schedule.
The 20M beam which looked SOOO impressive on the ground is equally
impressive in the air.
A third set of guye (sp) wires was attached at the top. The beam is just
REAL BIG.
The beam has been rotated around and everything seams to work just fine.
Soo here we go again.
10M Ready
15M only 15M tribander left to install (Butternut ready)
20M Ready (need 200V Plug for TL 922 Amp)
40M Ready
80M Ready
160M Ready ( Need ALPHA Amp/may have preamp ready soon)

Computers
Need to install 3 hopefully before next weekend
1- Tom's upstairs Computer
1- Dave's Computer
1- Marty's Computer

Today's Help came from KD0FW, K0LW, KG0US, KI7WO, K0OU, W0ZAP, KU1CW
Thanks for all the help.. 1 Tower, 1-20M MONSTER beam w/ Rotor, 2-Butternut
Verticals
Not a bad weekend.

Needs: Really need to get all computer equipment in place ASAP. I would like
to troubleshoot this weekend. That means everything in place as it will
be... Fire everything up and see what intereference RFI will be created that
effects the operation.
CAN WE OPERATE where we want to?
Do we get kicked off the network?
And a host of other questions...
Please do what you can to get the rest of the supplies in place so we can
test things this coming weekend. Next weekend will be another working
weekend...
We'll need to re-set some of the radials that have been tripped over and
pulled up, set the 15M tribander up and wire the rotor. Wire the 775 to Amp
and confirm operation.
We've had over a month of great preparation. I want to make sure I've done
all the troubleshooting I can before Easter Weekend. If you haven't been out
to the house.. next weekend would be a good weekend to just stop by and see
what's going on before you try to show up in the dark and get lost.

Thanks
Tom
AE9B

Go Southern Illinois Salukis !!!!
SWEET 16 !!!!