[KCDXC] Packet Cluster

Sat, 29 Jun 2002 17:07:01 -0500

Steve had to change, the 24.181.160.52 was under home.com,. then they went
qrt, so he went to dynip with his present ISP

----- Original Message -----
From: "Marshall Toburen" <[email protected]>
To: <[email protected]>
Sent: Saturday, June 29, 2002 4:50 PM
Subject: Re: [KCDXC] Packet Cluster

> Thanks.  That certainly works.  For some reason I have been using IP
> 24.181.160.52
>
> ----- Original Message -----
> From: "Marty Tippin" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, June 29, 2002 12:27 PM
> Subject: Re: [KCDXC] Packet Cluster
>
>
> > Works fine if you use the address at the bottom of every e-mail from the
> > reflector...   If you can't access it by the address below, call your
ISP
> > and complain.
> >
> > -Marty NW0L
> >   [email protected]
> >
> > At 12:13 PM 6/29/2002, you wrote:
> > >I am not sure what has gone wrong but I haven't been able to Telnet
into
> the
> > >Packet Cluster for several weeks.  Is there a problem with this access
> > >method?  Could someone tell me what the current Telnet address is so
that
> I
> > >could check my settings?
> > >
> > >Marshall, AA0FO
> > >
> > >_______________________________________________
> > >Connect to the W0MW Packetcluster:
> > >telnet to: w0mw.dynip.com
> > >or in the Kansas City Area, on 144.95 Mhz, connect to w0mw
> > >KCDXC mailing list
> > >[email protected]
> > >http://mailman.qth.net/mailman/listinfo/kcdxc
> >
> > _______________________________________________
> > Connect to the W0MW Packetcluster:
> > telnet to: w0mw.dynip.com
> > or in the Kansas City Area, on 144.95 Mhz, connect to w0mw
> > KCDXC mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kcdxc
>
> _______________________________________________
> Connect to the W0MW Packetcluster:
> telnet to: w0mw.dynip.com
> or in the Kansas City Area, on 144.95 Mhz, connect to w0mw
> KCDXC mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kcdxc