[Kantronics] KAM, 98 and 3+ Questions

[Bill Aycock]

Craig- as far as I know, the RF getting to the mic cannot be coming from 
the packet controller port. The RF must be coming from the RF port, ie, the 
antenna. This is usually an indicator of a miss -matched antenna or feed 
line. All the controller does is turn the RF on and off.
Is the rig on the same band and frequency when it does and does not have 
RF-Mic problems? What is the SWR measured when there is a probem?
Bill

At 09:37 AM 5/3/2005 -0400, you wrote:

>Jay,
>
>I run a FT-990 with a KAM+ and occasionally a AEA-PK232MBX. Both are 
>connected to the Packet port
>(aka AFSK) on the rear of the radio. I have never had RF get into 
>anything. Everything has ran
>solid as a rock for years.
>
>Something worth mentioning .... In this arrangement the MIC is hot when 
>the controller keys the rig.
>Things are fairly quiet here so this has never presented a problem.
>
>Craig - N4CQR
>
>
>
>
>_______________________________________________
>Kantronics mailing list
>Kantronics at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kantronics
>
>
>
>
>
>SPAM: ---------------------- Spamnix Spam Report ----------------------
>SPAM: Score: 51
>SPAM: Action: None
>SPAM: ------------------- End of Spamnix Spam Report ------------------

Bill Aycock - W4BSG
Woodville, Alabama