[K3PZN-List] Yaesu FT-891 Thoughts

Sat Sep 2 20:14:37 EDT 2017

Curt,
Thank you for the suggestion. Im actually borrowing an SWR/Power meter. I wasn’t checking that using CW and never saw an problems until I changed the mode and then the SWR was really high and even a warning came up on the rig. I have an R5 Vertical and a junior G5RV. I have a manual antenna tuner somewhere but I also have an automatic antenna tuner that came with my 706, its the LDG Z100. Doesn’t look like it will work with the 891 as it requires a power connection to the radio its self which I’m guessing is how the tuner knows when to tune the antenna. If there is a way I can still utilize it let me know.

I was going to try and wait till Black Friday to get the Yaesu FC-50 which was designed to work with the 891. I actually left my job to focus on school which I’m glad I did because I don’t have to rush as much to get homework done. So if anyone needs help with anything PLEASE let me know!

Ill need to invest in a good Power/SWR meter at some point as thats something I don’t have. The one I’m borrowing is a Yaesu FY-60 I think, Very nice meter as well. The Junior G5RV I plan on replacing in the spring with a full size G5RV. It would be really cool if I could figure out how to make an adjustable rotatable dipole for 40-6 if thats even possible.

I also will need to replace most of my coax at some point to. The only good coax I’ve got is some RG-213 on my VHF antenna and RG-8 on the HF Vertical. Everything else is radio shack RG-58 including whats connecting the VHF Radio its self to the RG-213 because thats some serious stuff and all my coax it routed through a window.

Kyle
On Sep 2, 2017, at 7:38 PM, Curt Milton via K3PZN-List <k3pzn-list at mailman.qth.net<mailto:k3pzn-list at mailman.qth.net>> wrote:

Kyle
sorry about the rig issue.  let's insure you don't have a short circuit connection at your antenna input, and that you aren't running a high VSWR where you are operating.  so please be cautious in this regard.  (if momentary issues would kill a rig - mine would all be dead - but persistent operation into a bad antenna can cause problems).

you certainly acquired a nice rig.  the operator's (you) connection with the front panel is very important - you were wise to evaluate that you will enjoy using the rig.

if you use it on FM -- please reduce the output power on that mode - I suggest around 40-50%.  it won't make a huge difference in your range -- but it will help preserve the finals as FM runs 100% duty cycle when transmitting.  it is much harder on the rig than SSB.  same for digital modes -- run those at lower power.

do explore the digital modes -- all from RTTY to PSK31 to all the newer modes can be a blast.

enjoy the new rig.

Curt

   On Saturday, September 2, 2017 4:39 PM, Kyle Thornton <kyle.3599 at outlook.com<mailto:kyle.3599 at outlook.com>> wrote:

Hi All,
So my 706 seems to have bitten the dust (I think the finals went bad as it has very very little output power, Mike can hear me but nobody else seems to be able to but he’s also a stones throw away) After contemplating what to do as its a 20 year old radio even though its a very nice radio I decided to get the 891. I don’t plan on getting rid of it but to use it to learn what went wrong and how to fix it. I just got the 891 today and so far love it! Haven’t made any contacts yet but the receive is really nice and you can really pull a signal in out of the noise. I have not tried it yet with digital as I’m waiting on the cables from Tigertronics but I suspect it will do well. A lot of people seem to complain that it doesn’t have 2m/70cm like the 857D did but I do not find that a problem as its my base HF radio to go along with my Kenwood TM-281a. Its a VERY menu driven radio but all the common stuff (except power output) is in a quick access menu. Other than that I’ve had no issues what so ever with it. Im very impressed with Yaesu as I’ve never had one and the quality is amazing. I think I’m a pretty picky person with radios and how they look, I had looked at an 857D but I didn’t like how small the screen was and although I’m sure useful I really didn’t like the HUGE VFO knob it had and it was also a bit more expensive. I received a heil microphone with it for free as some offer HRO was doing. Haven’t tried that out but its a kind of mic that you’d put on a boom.
Let me know what you guys think about it or any questions about it. Just thought id give my general view of it after receiving it.
Kyle
KC3FMP
______________________________________________________________

73 de K3PZN Westminster, MD
______________________________________________________________
K3PZN-List mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3pzn-list
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3PZN-List at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________

73 de K3PZN Westminster, MD
______________________________________________________________
K3PZN-List mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3pzn-list
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3PZN-List at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html