[K3PZN-List] Items for Sale by K4CGY

[James Owen]

Hi Guys,
   I have a update to the list. 

Today's list is as follows.

Elecraft K2/100 Transceiver  K2 with KPA100 100W
amplifier, KDSP2 DSP Filter, KNB2 Noise blanker, KSB2
SSB generator, Icom HM12 Hand Mic and FDIMP finger
dimple for tuning knob.
This K2 is well built and operating perfectly as far
as I can tell. I have used it for a couple of weeks
and is a nice operating rig. $1350.00. 

Oak Hills Research RFL-100 100 Watt RF Load  $35.00

Elecraft Dual directional Coupler  $38.00

Elecraft Wide Band Noise Generator  $38.00

Schurr Profi II Paddle--Looks like new and used very
little in original shipping box. $289.00

Speed-X straight key with shorting Bar--Like new
condition $35.00

Radio Works T4 line isolator  like new $39.00

2Mtr Mobile 5/8 wavelength mag. mount antenna, this I
think is a Valor, very good condition and about an
year old.  $15.00.

100 feet or Radio Works RG-8x coax with molded on
connectors--New $19.00

SWR Meter-Sigma--Basic SWR meter rated for 2000Watts,
3.5-150 Mhz  $7.50

KenPro KR500 Elevation rotor for satellite antenna's.
This unit has a bad drive motor that's easy to replace
and should be available from Kenpro.  $50.00

VHF/UHF Manual fourth edition(1983) by Jessop G6JP a
RSGB publication $8.00.

ARRL Antenna Modeling course. Nearly new. This is the
textbook you will need if you take the current ARRL
CEP antenna modeling course. $20.00


Previous on list and not sold yet.

Cushcraft Boomer 13B2 2M 13 ele Yagi 15.8 dBi gain,
26Db FB, 15' boom length. $99.00  Will need new
U-bolt clamps otherwise in excellent condition.  

Cushcraft Twist Oscar Beam, A148-20T 20 ele, 13 dbd
Gain, on 10.8' boom. $50.00  This will need some
steel hardward replaced. Mainly the u-bolts and
fast-on nuts mounting the elements. A new plexiglass
insulator for the driven element and a few elements
straightened.
 
Cushcraft Twist Oscar Beam A432-40T 40 Ele, not sure
of gain but likely around 15-17 dbd. $70.00. Will need
all steel hardward replaced, mainly u-bolts and
clamps.


Icom IC-746 Pro with optional PS-125 power supply S/N
01598 includes instruction book. This transceiver
covers 160M thru 2meters and is in very good to
excellent condition. It's clean though it has a few
scratches on the case. I have done a quick check and
it seems to preform just fine. I would give it a 9 out
of 10 rating. $1150.00. 


Please email me at K4CGY at yahoo.com or call
410-635-2989 after 7PM.



73 Jim K4CGY

James C. Owen, III K4CGY

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com