[K3CAL] [CALV-AUXCOMM] this is why you check your cable

[n3pph at comcast.net]

For a company that uses old imac processors I can easily see that 
happening, mystery solved.

73,
Bob N3PPH

------ Original Message ------
From: "Shawn Donley" <n3ae at comcast.net>
To: "n3pph at comcast.net" <n3pph at comcast.net>; "Calvert County, MD 
AUXCOMM" <calv-ares at mailman.qth.net>; "CARA" <k3cal at mailman.qth.net>
Sent: 3/16/2021 9:41:34 PM
Subject: Re: [CALV-AUXCOMM] this is why you check your cable

>Maybe when ESA was making up the cables they found some old stock that was marked with what they thought was the word "Dandy RG-58" but it was really "Tandy RG-58."
>
>
>>  On 03/16/2021 7:58 AM n3pph at comcast.net <n3pph at comcast.net> wrote:
>>
>>
>>  When putting up antennas it is very important to have good cable to feed
>>  it with. A simple test after you put the connectors on with a dummy load
>>  is a good idea, especially if you are installing in a difficult to
>>  access location.
>>http://www.arrl.org/news/ariss-ham-station-in-columbus-module-is-once-again-operational
>>
>>  73,
>>  Bob N3PPH
>>  ______________________________________________________________
>>  Visit us on the web: https://ares.k3cal.org
>>
>>  CALV-ARES mailing list
>>  Home: http://mailman.qth.net/mailman/listinfo/calv-ares
>>  Help: http://mailman.qth.net/mmfaq.htm
>>  Post: mailto:CALV-ARES at mailman.qth.net
>>
>>  This list hosted by: http://www.qsl.net
>>  Please help support this email list: http://www.qsl.net/donate.html