[K3CAL] Fwd: Uncaught bounce notification about 1/2 inch hardline available.

[W3PQS at comcast.net]

Hello all I hope this works

I was up at Sutherland at repeater site yesterday I reset the 2 m repeater.

I set the squelch tail 250 milli-seconds it was on zero I also set the squelch one notch this seems to be making it work better.

I am keeping everybody informed of what's going on hope this helps please check the repeater right now and let me know what you think.

Dave W3PQS

 

From: k3cal-bounces at mailman.qth.net <k3cal-bounces at mailman.qth.net> On Behalf Of Dave via K3CAL
Sent: Tuesday, July 7, 2020 8:10 PM
To: k3cal at mailman.qth.net
Subject: [K3CAL] Fwd: Uncaught bounce notification about 1/2 inch hardline available.

 

Dave, the email address you are using was not recognized by the reflector.  I'm forwarding the message for you.  

 

Dave H

KB3RAN



-----Original Message-----
To: k3cal-owner at mailman.qth.net <mailto:k3cal-owner at mailman.qth.net> 
Sent: Tue, Jul 7, 2020 3:05 pm
Subject: Uncaught bounce notification

The attached message was received as a bounce, but either the bounce

format was not recognized, or no member addresses could be extracted

from it.  This mailing list has been configured to send all

unrecognized bounce messages to the list administrator(s).

 

For more information see:

http://mailman.qth.net/mailman/admin/k3cal/bounce

 

 

 

 

HI ALL

I have ½ in hard line . If you thank you can use some let me know .

Its FREE

Dave W3PQS 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20200709/caef2565/attachment-0001.html>