[K3CAL] Experimenting with 9600-baud APRS

[tom rozenbroek]

A 1200 baud packet network seems like a good first step.
I have a MFJ-1270 with a Kenwood TM-231 that I could put on the air as a test setup/temporary digipeater. I would want to use my own call sign, but would leave the digipeater open for any ham to use. Also, I would hope that a more permanent plan would be developed shortly after this project was stated. 
73s.
kb2bcg-----

-------- Original message --------
From: Eric Christensen via K3CAL <k3cal at mailman.qth.net> 
Date: 05/31/2016  19:52  (GMT-05:00) 
To: k3cal at mailman.qth.net 
Cc: Eric Christensen <eric at christensenplace.us> 
Subject: Re: [K3CAL] Experimenting with 9600-baud APRS 

On 05/31/2016 12:03 PM, N3AE wrote:
> Actually, I'd just like to have some Calvert ops get together on 1200 AX-25 packet for a net, either unprotected mode or multi-connect before we start playing with 9600.   Seems we spend too much energy aiming for a moon shot before we even have the ability to get into orbit.

Well, we've had that capability for a while with the APRS digipeater up.
 I wish it had more local use...

--Eric
______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160601/23c9c570/attachment-0001.html>