[K3CAL] Repeater testing

Thu Jul 28 10:53:29 EDT 2016

Gary.  I don't have a dual bander ht to try that.  Good luck and keep me posted.  The interconnection will be between the 2 existing repeaters.  I suggest you contact the repeater committee for the details.  I think the address is repeater at k3cal.org.  Stay tuned, better comms are coming.  

David Hardy      
davehardy0101 at aol.com

KB3RAN

-----Original Message-----
From: Gary <Gary at eiff.com>
To: k3cal <k3cal at mailman.qth.net>
Sent: Thu, Jul 28, 2016 9:52 am
Subject: Re: [K3CAL] Repeater testing

 Thank you Dave,

 I was wondering if that wasn’t the case.  RE the new repeater, I’ll have to try it out.  I should be able to hit it without much problem, hopefully even with my HT.  Are the plans for the 70 cm and 2 M repeaters to be linked, or is the interconnection you are referring to with other repeaters.  I take it that digital coms will be supported – what protocol?  (DStar or Fusion, other) Will the system support Echolink? (Inquiring minds want to know ;-)

 Hmm, I’ll have to look into RT Systems.  I currently use CHIRP.

 Gary  W3GME

 ---- Original Message ----
 From: "David Hardy via K3CAL" <k3cal at mailman.qth.net>
 Sent: 7/28/2016 8:46:09 AM
 To: k3cal at mailman.qth.net
 Cc: "David Hardy" <davehardy0101 at aol.com>
 Subject: Re: [K3CAL] Repeater testing

 Gary,  this is the K3CAL repeater that we use on a daily basis.  Not a new repeater.  It is the one you used for the net the other night.  It is listed as Sunderland.  Mt Hope is the community center where we have our radio room and is nearby the repeater tower.  

 The new repeater is the one at Prince Frederick.  It is on 444.950 with a PL Tone of 156.7.  This is the repeater that should help us in south county a better chance to communicate, especially when the repeaters are interconnected.  That will allow complete county coverage.  

 I have a list of a lot of the repeaters that I have programmed into my radios.  I use RT Systems to program my radios.  If anyone wants my file, I'd be willing to share it.  I find RT Systems files can be easily shared between radios.  This might work for CHIRP, also, but I don't use that method.

  David Hardy      
   davehardy0101 at aol.com

   KB3RAN

  -----Original Message-----
  From: Gary <Gary at eiff.com>
  To: k3cal <k3cal at mailman.qth.net>
  Sent: Thu, Jul 28, 2016 8:34 am
  Subject: Re: [K3CAL] Repeater testing

     Dave,
     I heard the Mt. Hope repeater discussed during the last meeting and now see it in your email.  I'm unaware of this repeater and don't find it in the repeater directory.  Could you give me some details like location, freq, PL, etc?  Thanks  Gary W3GME

     ---- Original Message ----
     From: "David Hardy via K3CAL" <k3cal at mailman.qth.net>
     Sent: 7/28/2016 7:23:05 AM
     To: k3cal at mailman.qth.net
     Cc: "David Hardy" <davehardy0101 at aol.com>
     Subject: Re: [K3CAL] Repeater testing

     Thanks Ron for the update.  My problem with Mt Hope is probably propagation related.  And I'm thinking the PF problem is still either antenna or audio level settings.  I could hear a lot of the testing yesterday and I thought the audio out sounded good.   I send you my thoughts on the messages already.  Keep up the good work.   

     Who has the key??  Fess up and help the club out and turn it in so access to the repeater can be made easier.  And if you have a digital radio or several, consider giving or loaning one to the club.

      David Hardy           
       davehardy0101 at aol.com

       KB3RAN

      -----Original Message-----
      From: WA4PRR <wa4prr at comcast.net>
      To: Calvert Amateur Radio Association - K3CAL <k3cal at mailman.qth.net>
      Sent: Wed, Jul 27, 2016 11:00 pm
      Subject: Re: [K3CAL] Repeater testing

         Dave,

         The PF machine is now running on the new repeater and controller.  My HT will bring it up from Mt. Hope parking lot.  I still suspect an antenna problem, but It does not show up as high SWR.  We replaced one receive cable, but it should be replaced by a double-shielded one once we can find or make one.  Yeasu is sending us a replacement internal receive cable (at NO cost!) for our old DR-1 repeater to get it back into good shape.  

         No one has touched the Mt. Hope repeater.  We want to get the PF machine right first.  There are many options to be set up in the controller, as well in the repeater itself.  We have a basic program in there right now.  We need input from the club as to what messages, timer settings, and quiet times, etc, are to be programmed in.

         Things that have slowed us down:

         Access to the PF repeater is difficult to schedule with the state, but so far, they have been very good at giving us access.

         Access to Mt. Hope is not easy, either.  I believe that a CARA key exists, but no one will admit to having one.

         A mis-mash of connector types used between the equipment requires several types of cables and adapters to be used.  It is difficult to have the right ones on hand as we troubleshoot.  When the configuration documentation is completed, this will no longer be a hindrance.

         The club no longer owns a digital radio, so digital check out must depend on assistance from those who have one.

         Work continues... More info soon.  YOUR CONTINUED PATIENCE IS APPRECIATED. 
         73,

          Ron / WA4PRR - Sent from my iPad

         On Jul 27, 2016, at 1:20 PM, David Hardy via K3CAL <k3cal at mailman.qth.net> wrote:

          I have attempted to call on the 2 mtr and the 440 machines since 10AM and have not been able to be heard.  Unacceptable.  Sorry,   I have called from my base station and my mobile with no contact.  I hear the kerchunk and reports that I am there but no audio.  Hope the PF repeater can do better than this on a regular basis.  And it's also worrisome that I can't hit the Sunderland machine either since I have been using it reliably for the past couple of months as on Monday night net and talking with others at other times.  Is it weather?  Antenna?  Mine?  Yours?              

            David Hardy                 
             davehardy0101 at aol.com

             KB3RAN

          ______________________________________________________________
          K3CAL mailing list
          Home: http://mailman.qth.net/mailman/listinfo/k3cal
          Help: http://mailman.qth.net/mmfaq.htm
          Post: mailto:K3CAL at mailman.qth.net
          Unsubscribe: mailto:k3cal-request at mailman.qth.net?subject=unsubscribe

          This list hosted by: http://www.qsl.net
          Please help support this email list: http://www.qsl.net/donate.html

      ______________________________________________________________
      K3CAL mailing list
      Home: http://mailman.qth.net/mailman/listinfo/k3cal
      Help: http://mailman.qth.net/mmfaq.htm
      Post: mailto:K3CAL at mailman.qth.net
      Unsubscribe: mailto:k3cal-request at mailman.qth.net?subject=unsubscribe

      This list hosted by: http://www.qsl.net
      Please help support this email list: http://www.qsl.net/donate.html

  ______________________________________________________________
  K3CAL mailing list
  Home: http://mailman.qth.net/mailman/listinfo/k3cal
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:K3CAL at mailman.qth.net
  Unsubscribe: mailto:k3cal-request at mailman.qth.net?subject=unsubscribe

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net
Unsubscribe: mailto:k3cal-request at mailman.qth.net?subject=unsubscribe

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160728/2e1adff0/attachment-0001.html>