[K3CAL] New Repeater Checkout

[Ed Noell]

Dave;

The antennas only look like they're leaning away from the towers because 
the correct mounts have just been installed. The antennas are now plumb 
(straight up and down) as they should be.

Per Ron's reply to you, he will be correcting the rest of the problems 
with the others on the repeater committee.

Ed
KC3EN

On 07/16/2016 01:20 PM, David Weaver wrote:
>
> I drove by the repeater site today on the way to the farm 7/16 /2016 I 
> notice the 440 antenna is leaning away from the tower. As repairs been 
> made yet. If so, the antenna is not straight. Also, the 440 machine is 
> not working. Did not see anything on reflector about machine being 
> down. Is this the new repeater or the old repeater?????? if it's down 
> how long will it be down ?????
>
> I hope is a member I can ask these questions see nothing on reflector 
> about it.
>
> Dave W3PQS
>
> *From:*K3CAL [mailto:k3cal-bounces at mailman.qth.net] *On Behalf Of *Ed 
> Noell
> *Sent:* Wednesday, July 13, 2016 11:17 PM
> *To:* Calvert Amateur Radio Association - K3CAL
> *Subject:* Re: [K3CAL] New Repeater Checkout
>
> Thank you Ron, WA4PRR and Steve, N3IPN for putting the time and effort 
> into making the repeater work correctly. .
>
> I very much appreciate all of the time and work you've put into this 
> project and doing it right.
>
> Thanks again!
>
> Ed
> KC3EN
> President
>
> On 07/13/2016 08:15 PM, wa4prr at comcast.net <mailto:wa4prr at comcast.net> 
> wrote:
>
>     All,
>
>     After lunch at Mt. Hope today, Steve / N3IPN and I put the new
>     repeater into a dummy load at the club station and checked it out.
>      The repeater works _very_ well now that all the parameters are
>     set properly!
>
>     We are now working on programing the Arcomm controller.  We have
>     download the Arcomm setup software, and have backed it up.   Now,
>     we are interfacing a PC laptop to the controller to make it easier
>     to program it.  We will keep everyone informed of our progress.  73,
>
>     Ron / WA4PRR
>
>
>
>
>     ______________________________________________________________
>
>     K3CAL mailing list
>
>     Home:http://mailman.qth.net/mailman/listinfo/k3cal
>
>     Help:http://mailman.qth.net/mmfaq.htm
>
>     Post:mailto:K3CAL at mailman.qth.net
>
>       
>
>     This list hosted by:http://www.qsl.net
>
>     Please help support this email list:http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160716/000aa872/attachment.html>