[K3CAL] New Repeater Checkout

[David Weaver]

I drove by the repeater site today on the way to the farm 7/16 /2016 I notice the 440 antenna is leaning away from the tower. As repairs been made yet. If so, the antenna is not straight. Also, the 440 machine is not working. Did not see anything on reflector about machine being down. Is this the new repeater or the old repeater?????? if it's down how long will it be down ?????

I hope is a member I can ask these questions see nothing on reflector about it.

Dave W3PQS

 

From: K3CAL [mailto:k3cal-bounces at mailman.qth.net] On Behalf Of Ed Noell
Sent: Wednesday, July 13, 2016 11:17 PM
To: Calvert Amateur Radio Association - K3CAL
Subject: Re: [K3CAL] New Repeater Checkout

 

Thank you Ron, WA4PRR and Steve, N3IPN for putting the time and effort into making the repeater work correctly. .

I very much appreciate all of the time and work you've put into this project and doing it right. 

Thanks again!

Ed
KC3EN
President

On 07/13/2016 08:15 PM, wa4prr at comcast.net wrote:

All,

 

After lunch at Mt. Hope today, Steve / N3IPN and I put the new repeater into a dummy load at the club station and checked it out.  The repeater works very well now that all the parameters are set properly!  

 

We are now working on programing the Arcomm controller.  We have download the Arcomm setup software, and have backed it up.   Now, we are interfacing a PC laptop to the controller to make it easier to program it.  We will keep everyone informed of our progress.  73,

 

Ron / WA4PRR






______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net
 
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160716/f371ba32/attachment.html>